Vaporing Machines
Cordless & Corded ULV cold Fogging Machines
Cold Fogger
The portable cold fogger, distinguish by simple handling and optimal operating characteristics. This unit is equipped with a 700–1000-Watt electric motor producing greater aerosol volume at higher velocity with deeper penetration. An exchangeable air filter protects the motor against dirt and dust. This is fitted with an infinitely adjustable flow regulator enabling different output quantities between the ranges of 0.3 to 15 litres per hour.
Important Features:
- Constructed of resistant, hard, durable, thermoplastics.
- A powerful electric motor producing a large volume of aerosols at a higher speed with deeper penetration.
- Uniform spectrum for the droplet.
- Droplet size can be adjusted from the increase or decrease of the solution flow.
Advantages:
- Better adaptability and ideal equipment for applying insecticides, disinfectants and aggressive chemical substances.
- Better fog action range compared to other similar types of equipment.
- The range of applications includes spaces and surfaces treatment.
- Easy handling and operation.
Advanced Cold Fogger
This is fitted with an infinitely adjustable flow meter. This makes an output between 5 and a maximum 250ml/min possible.
This is the result of constant development for easier operation and handling. The technical details are the same as Cold Fogger, but fitted on a panel, it can automatically rotate between 90° and 360°, spraying the solution on the needed surface. There is no need to carry it around. This can also be fitted to the wall by means of wall support. With the 180o rotation set, the reach of spray can be doubled. Using the timer accessory, the device can be programmed to automatic spraying.
ULV Aerosol-Generator
The ULV aerosol generators are special machines that operate according to the ULV method. ULV is defined as the ultra-low volume application rate per unit area/space required to achieve effective pest control. This method is highly effective, it breaks the liquids up into aerosols and the powerful blower and the thermic conditions distribute the fine droplets evenly over the affected area or leaf surfaces.
Large greenhouse areas can be treated perfectly with ULV aerosol generators. The equipment is available in several versions e.g., with a mixer in the solution tank (very useful when working with substances in powder form), or with a timer for automatic control and more efficient operations. Its high-grade stainless-steel execution with a large solution tank allows a high output, large air volume and a wide droplet spectrum.
Benefits:
- Adjustable spray heads 360°
- Every nozzle can be operated individually
- The low noise level in electrically driven units
- Excellent distribution
- High penetration depth without requiring additional ventilation
- All pesticides can be applied, including wettable powders
- Extremely economical pesticide consumption
- Complete control for automatic operation upon request
- Mixer motor for solution tank available (particularly important when using wettable powders)
Portable thermal fogger
Power Knapsack Sprayer
Power Knapsack Sprayer a transportable electrical sprayer and has an excellent spraying performance. Its modern engine technology, low weight, break-proof and corrosion-free body with transparent solution tank make it a popular product worldwide. It has adjustable carrying straps with ergonomically shaped back support.
Optional Accessories:
- Dusting attachment (also for granulate)
- Liquid booster pump
- Double nozzle
- ULV attachment
- ULV spinning disk attachment
Stainless Steel Compression Sprayers
It has a stainless-steel tank for increased corrosion resistance and service life. It is safe to use with its non-spill filling funnel, pressure gauge and safety valve, brass pump.
Its other features include a 120cm pressure hose, discharge valve with filter sieve, angled brass spray lance with fine hollow-cone nozzle, spare parts compartment, carrying strap, removable plastic cover to protect pressure gauge and safety valve.
New ignition system Thermal Fog Generator
The Thermal Fog Generator is a lightweight and easily portable pulse jet thermal fogger capable of applying 11 gallons (42 Liters) of solution per hour. The unit has been designed for use with insecticides, Acaricides and fungicides (mostly wettable powders) which are soluble in oil and water. To apply water-based solutions, the optional water-based fog tube must be used for efficient application.
Lightweight for convenient use in areas where poor roads and tracks make it difficult to handle heavy equipment. The only mass-produced unit with an air intake valve covered, providing a silencer effect and protection against dust and solution particles.
- Petrol tank made from stainless steel
- Fog tube made from stainless steel
- Formulation tank made from stainless steel
- Cooling jacket made from enamelling sheet
Considering the maximum flow rate, an operator can treat at a flow rate of 1 litre /2.500 m3 up to 105.000 m3/h or 3.708.000 ft3/h.
Automatic pneumatic mechanic
This fogger has been designed for economic treatment in large areas. The tube is vertically adjustable, as needed, using a handheld crank. To meet the strictest safety requirements, when flammable liquids are used, this fogger is equipped with an electronic pneumatic cut-off device, in case of petrol leaks or decreasing pressure in the gas fuel system.
This unit is also equipped with sound insulation with an air filter, which reduces the noise stress generated for the operator to the minimum. It is easy to carry due to its handlebar which runs around the entire solution tank.
The unit is ideally suited for,
- Mosquito, gnat, fly and other flying insect control.
- Disease control through insect, bacterial and fungal control.
- Combat Malaria, dengue/yellow fever, chikungunya and more.
- Disinfecting of large areas outdoor, warehouses, manufacturing plants
- Disinfecting of surfaces and objects.
- Disinfection or treatment of poultry and livestock containment.
- Mould & mildew control in commercial and residential applications.
- Hydration and pest control for greenhouses, plant nurseries, gardens, etc.
- Special effects for the film & entertainment industry.
This unit is ideally suited for large area treatment outdoors, in large warehouses and manufacturing plants, and for applying water-based emulsion concentrations in large greenhouses. A rotary table is available as an option to make the unit mobile in the horizontal plane. Our machines are also used for the disinfection of stables etc. for example with formalin or any other disinfectant. The list of possible applications can be continued practically without restriction.